Extinguishing agents can be found in solid, liquid or gaseous forms. When combined with fire suppression systems or fire sprinkler systems, they are highly effective in putting out fires.
DRY CHEMICAL POWER (ABC Class) DESCRIPTION: Dry Chemical Powder (ABC Class) are mono ammonium phosphate-based powders that are generally for multipurpose use on Class A, B and C fires. These dry chemical powders comes in 40% and 90%. SABS APPROVED. - USES: - CLASS A FIRES - * It insulates Class-A fires by melting at approximately 350–400 degrees F. * Class “A” fires are caused by the burning of common combustible materials, such as wood, paper, or trash. CLASS B FIRES: * The powder breaks the chain reaction of Class-B fires by coating the surface to which it is applied. * Class B fires consist of flammable liquid or gas which include gasoline, oil, propane, and natural gas. CLASS C FIRES: * It is safe and effective for Class-C fires since it is a non-conductor of electricity. * Class C fire deals with live electrical equipment and need to be put out with equipment that will not conduct its energy back to the user as in the case with water. Electricity can also cause Class A and B fires. INAPROPRIATE USES: ABC dry chemical is inappropriate for chlorine or oxidizer fires. The resulting chemical reaction can cause an explosion or a breakdown of the chemicals releasing toxic gases. Water should be used. ABC dry chemical is inappropriate for certain metal fires (Class-D) as well as cooking oil fires (Class-K). Due to the corrosive properties of ABC Dry chemical, it is not recommended for use around aircraft or sensitive equipment. PRODUCTS: * 40% ALPHA MEGAFLO * 40% ALPHA HYPERFLO * 90% ALPHA DYNAFLO
FIRECHEM FIREFIGHTING FOAM Foam is an aerated solution which is used for fire prevention and firefighting. Foam concentrate is the full strength liquid which is diluted and processed to produce foam. The foam solution is the mixture produced by diluting foam concentrate with water before processing to make foam. DESCRIPTION: Foam is an aerated solution which is used for fire prevention and firefighting. Foam concentrate is the full strength liquid which is diluted and processed to produce foam. The foam solution is the mixture produced by diluting foam concentrate with water before processing to make foam. CLASS A FOAMS are mostly used to fight wild fires. They assist in the wetting and saturation of Class A fuels with water, which aids fire suppression and can prevent re-ignition. Class A foams are available for use with SafeQuip’S range of skid units. CLASS B FOAMS are best suited for putting out fires that involve flammable liquids. SYNTHETIC FOAM provide better flow and faster knockdown of flames, but offer limited post-fire security. PROTEIN FOAM are biodegradable. They flow and spread slower than synthetic foam, but provide a heat resistant foam blanket and are more durable. FIRE FIGHTING FOAM
DESCRIPTION: SafeQuip Purple K is the most effective dry chemical in fighting Class B (flammable liquid) fires. PRODUCT DESCRIPTION: This fire extinguishing agent are used in military facilities, oil companies and vehicles, etc. Safequip Purple K is a dry chemical called potassium bicarbonate that is non-conductive and non-corrosive, and can be cleaned up by vacuuming, sweeping or flushing with water. Safequip Purple K, is a potassium bicarbonate base dry-chemical fire suppression agent used in some dry powder fire extinguishers. It is the most effective dry chemical in fighting class B (flammable liquid) fires, and can be used against some energized electrical equipment fires (class C fires). It is at least 5 times more effective against class B fires than carbon dioxide and has about twice the effectiveness of sodium bicarbonate based powders. This is due to the larger size of the potassium ion. Safequip Purple K Dry Chemical Powder (DCP) works by directly inhibiting the chemical chain reaction in the combustion zone of flammable liquid fires which forms one of the four sides of the fire tetrahedron (Heat + Oxygen + Fuel + Chemical Chain Reaction = Fire) This chemical reaction produces ‘free radicals’ which attach themselves to the surface of the powder particles introduced into the combustion zone. This inhibits the chemical reaction forming the flame and causes the flame to cease existing. Safequip Purple K (90% Potassium Bicarbonate) is a Class BC powder and is available for use in areas such as airfields, chemical plants and refineries where superior fire extinguishing qualities are required. It is manufactured in house by Safequip along with the other Blue Crane range of SABS certified dry-chemical fire suppression agents. Safequip Purple K is one the the MOST EFFECTIVE DRY chemical in fighting CLASS B (flammable liquid) fires *Technical data sheets are available from Safequip (Pty) Ltd * Safequip Purple K is packaged in sealed buckets containing 25kg of the dry chemical powder. * The 9kg Safequip Purple K Fire Extinguisher with fire rating of 233B is SABS tested and approved in accordance with the SANS 1910 standard. * Safequip Purple K is a potassium bicarbonate base dry-chemical fire suppression agent used in some dry powder fire extinguishers. It is the most effective dry chemical in fighting class B (flammable liquid) fires, and can be used against some energized electrical equipment fires (class C fires). It is at least 5 times more effective against class B fires than carbon dioxide and has about twice the effectiveness of sodium bicarbonate based powders. This is due to the larger size of the potassium ion. - Safequip Purple K Dry Chemical Powder (DCP) works by directly inhibiting the chemical chain reaction in the combustion zone of flammable liquid fires which forms one of four sides of the fire tetrahedron (Heat + Oxygen + Fuel + Chemical Chain Reaction = Fire) Safequip Purple K is a Class BC powder and is SANS 1522 approved and is available for use in areas such as airfields, chemical plants and refineries where superior fire extinguishing qualities are required. It is manufactured in house by Safequip along with the other Blue Crane range of SABS certified dry-chemical fire suppression agents. APPEARANCE: A fine violet colour free flowing powder MAIN INGREDIANT: Potassium Bicarbonate 90%
DESCRIPTION: Because of their high auto-ignition temperatures, cooking oil fires are difficult to extinguish. In order to extinguish these fires they need to be cooled sufficiently therefore conventional extinguishers are not as effective due to risk of flash back and re-ignition. Specialist wet chemical extinguishers are ideal for Class F fires, involving cooking oils and fats, such as lard, olive oil, sunflower oil, maize oil and butter. It is extremely effective as the wet chemical rapidly knocks the flames out, cools the burning oil and chemically reacts to form a soap-like solution, sealing the surface and preventing re-ignition. SAFEQUIP’S WET CHEMICAL EXTINGUISHER is specifically designed to combat fires resulting from fats and edible oils burning in deep fryers. It is charged with a specially formulated wet chemical. The extinguisher is ideally suitable for use in restaurants, hospitals kitchens, nursing homes, hotels, schools, airports, and other similar facilities. This wet chemical extinguisher reacts with hot, burning cooking oil or fat. When the fire extinguishing substance is applied to the burning liquid it will cool and emulsify the oil, and the flames will immediately subside. An effective fire extinguishing film of foam forms on the surface which prevents re-ignition. APPLICATIONS: The wet chemical agent is a special salt based fire extinguishing liquid used in fire extinguishers or stationary fire extinguishing installations for fighting fires in deep fat fryers, frying appliances as well as air exhaust facilities in kitchens and is applied finely distributed to the burning surface using spray nozzles. ADVANTAGES AND FEATURES Wet Chemical Extinguishers are Suitable for cooking fat fires ‘Class and combustible materials ‘Class A’ (wood, paper and plastics) for which it carries a 13A Fire Rating. - As the agent is sprayed in fine atomized droplets onto a cooking oil/fat-related fire, it provides excellent flame knock-down and surface-cooling. - The cooling effect which it provides enhances its ability to prevent re- ignition. - Passed 35kV conductivity of discharge test making it safe for the inevitable use on electrical appliances. - Hose assembly incorporates a unique swivel connector for ease of directing the discharge. - Tested to extinguish fires resulting from cooking oil and fat burning of up to 75 litres in size. - User friendly comparatively light 6lt size. - Lance and nozzle constructed from high quality stainless steel. - Producing highly effective but gentle spray helps prevent hot oil splashing onto the user. - Considered non corrosive to most metals. - Biodegradable and non-toxic. - Long shelf life. - It is used as a portable extinguisher but the wet chemical is also suited for fixed fire extinguishing installations for deep fat fryers and cooker hoods. - The Wet Chemical Agent can be easily removed after use with lots of water or a steam jet cleaner. - It is normally used as a backup to an automatic fire suppression system - The extinguisher is re-chargeable - The agent is pre-mixed, eliminating the need for dilution before system re-charging.
Dry Chemical Powder (BC Class) Description: Dry Chemical Powder is divided into a ABC Class and a BC Class . This dry chemical powder BC CLASS consists of the Safequip Purple K and the SODA BIC. SODA BIC TYPES: * Beta Super Flo 90% * Beta Hyper Flo 40%
